SX1280ZXXXXGW1
The reference design for the gateway, leveraging 2.4GHz LoRa with SX1280, provides a complete, turnkey gateway solution that is interoperable worldwide with our LoRa Basics™ Modem for 2.4GHz. The gateway reference design is based on multiple SX1280 transceivers allowing simultaneous reception over three LoRa modulated channels operating on a single, programmable spreading factor.
Features
The reference design consists of :
- Four SX1280 RF transceivers (three dedicated to RX and one dedicated to TX roles)
- A complete RF front-end module with T/R switch, LNA and filters enabling high sensitivity half-duplex mode operation
- Simultaneously receive three LoRa channels in the 2.4GHz ISM Band with single-data rates programmable (SF7 ~ SF12 / 812.5kHz)
- Maximum transmit output power = +12dBm
- Simultaneously receive three LoRa channels in the 2.4GHz ISM Band single-data rates selectable (SF7 ~ SF12 / 812.5kHz)
- Maximum transmit output power = +12dBm
- Typical sensitivity level at 1% PER
- -116dBm at SF7 BW 812.5kHz
- -129dBm at SF12 BW 812.5kHz
- Ability to work in hostile RF environments such as close to Cellular mobile phones, WiFi routers, Bluetooth devices
- Simple to use USB interface
- Logistics & Supply Chain
- 産業
- ファクトリーオートメーション
- Smart Buildings & Home Automation
アプリケーション
Order Codes
- SX1280Z3DSFGW1 for SX1280 Gateway Development Kit
Additional Resources
Explore software downloads, documentation, recommended links, and more resources for this product.
HAL & Packet Forwarder on Github
Distributor/Catalog Supplier Inventory
View product availability from participating distributors below. Browse all distributers here.
Part # | Country | Qty | Buy | Distributor |
---|
関連情報
To see more videos Videos
The LoRaWAN-based gateway is the physical layer (PHY) interface for the LoRaWAN network server (LNS). On the one hand, it listens to certain parts of the radio spectrum and decodes LoRa®-modulated signals originating from LoRa-based sensors. On the other hand, the gateway transmits messages from the network down to a sensor as LoRa-modulated signals.
The exact parameters which govern the reception and transmission of these signals is specified in the LoRaWAN Regional Parameters. The parameters are regionally differentiated because there are different regulatory requirements in different regions of the world.
Expert Series: 5 Things You Need to Know about…
今すぐ読むmySemtechにログインすると、試作や生産に役立つ製品ドキュメントにアクセスできます。