SX1209
The SX1209 is a highly integrated RF transceiver capable of operation from 290 MHz to 928 MHz, including the 315 and 434 MHz license-free ISM (Industry Scientific and Medical) frequency bands. Its highly integrated architecture allows for a minimum of external components whilst maintaining maximum design flexibility. All major RF communication parameters are programmable and most of them can be dynamically set. The SX1209 offers the unique advantage of programmable narrow-band and wide-band communication modes without the need to modify external components. The SX1209 is optimized for low power consumption while offering high RF output power and channelized operation. TrueRF™ technology enables a low-cost external component count (elimination of the SAW filter) whilst still satisfying ETSI and FCC regulations.
Features
- High Sensitivity: down to -120 dBm at 1.2 kbps
- High Selectivity: 16-tap FIR Channel Filter
- Bullet-proof front end: IIP3 = -18 dBm, IIP2 = +35 dBm, 80 dB Blocking Immunity, no Image Frequency response
- Low current: Rx = 16 mA, 100 nA register retention
- Programmable Pout: -18 to +20 dBm in 1dB steps
- Constant RF performance over voltage range of chip
- FSK Bit rates up to 300 kbps
- Fully integrated synthesizer with a resolution of 61 Hz
- FSK, GFSK, MSK, GMSK and OOK modulations
- Built-in Bit Synchronizer performing Clock Recovery
- Incoming Sync Word Recognition
- 115 dB+ Dynamic Range RSSI
- Automatic RF Sense with ultra-fast AFC
- Packet engine with CRC, AES-128 and 66-byte FIFO
- Built-in temperature sensor
- Automated Meter Reading
- Wireless Sensor Networks
- Home and Building Automation
- Wireless Alarm and Security Systems
- Industrial Monitoring and Control
- Smoke detectors
アプリケーション
Packaging
- QFN24 | Tape & Reel | 3000 pieces
Order Codes
- SX1209IMLTRT
Pb(Lead)-Free/RoHS-Green Info
(-40°C to +85°C / 4000 cycles)
(50°C, 4000 Hrs)
Distributor/Catalog Supplier Inventory
View product availability from participating distributors below. Browse all distributers here.
Part # | Country | Qty | Buy | Distributor |
---|
関連情報
To see more videos Videos
The LoRaWAN-based gateway is the physical layer (PHY) interface for the LoRaWAN network server (LNS). On the one hand, it listens to certain parts of the radio spectrum and decodes LoRa®-modulated signals originating from LoRa-based sensors. On the other hand, the gateway transmits messages from the network down to a sensor as LoRa-modulated signals.
これらの信号の受信と送信を制御する正確なパラメータは、LoRaWAN地域パラメータで指定されています。世界の地域によって規制要件が異なるため、パラメータは地域ごとに異なります。
Expert Series: 5 Things You Need to Know about…
今すぐ読むTo begin working with LoRa technology on Amazon Sidewalk, Amazon Sidewalk developers will need specific development kits, such as those provided by Silicon Labs, and Nordic Semiconductor. Both companies offer comprehensive Sidewalk development kits that can help you get started with LoRa and Amazon Sidewalk right away.
Amazon Sidewalk Prerequisites and Development Kits
今すぐ読むmySemtechにログインすると、試作や生産に役立つ製品ドキュメントにアクセスできます。